{"id":293,"date":"2012-03-26T11:24:48","date_gmt":"2012-03-26T03:24:48","guid":{"rendered":"http:\/\/www.luwl.net\/?p=293"},"modified":"2012-03-26T11:24:48","modified_gmt":"2012-03-26T03:24:48","slug":"%e6%81%a2%e5%a4%8dcisco4503%e4%ba%a4%e6%8d%a2%e6%9c%ba%e7%9a%84%e5%af%86%e7%a0%81","status":"publish","type":"post","link":"http:\/\/www.luwl.net\/?p=293","title":{"rendered":"\u6062\u590dcisco4503\u4ea4\u6362\u673a\u7684\u5bc6\u7801"},"content":{"rendered":"

\u516c\u53f8\u76844503\u4ea4\u6362\u673a\u4fee\u597d\u540e\u53ef\u4ee5\u6b63\u5e38\u542f\u52a8\uff0c\u4f46\u6ca1\u6709\u5bc6\u7801\u3002\u67e5\u9605cisco\u7684\u5b98\u65b9\u6587\u6863\u540e\u5bf94503\u8fdb\u884c\u4e86\u5bc6\u7801\u91cd\u7f6e\u3002\u6574\u4e2a\u64cd\u4f5c\u8fc7\u7a0b\u5982\u4e0b\uff1a<\/p>\n


\n[cc lang=”php”]
\n\/\/\u542f\u52a8\u7535\u6e90
\n **********************************************************
\n * *
\n * Welcome to Rom Monitor for WS-X4013+TS System. *
\n * Copyright (c) 1999-2004 by Cisco Systems, Inc. *
\n * All rights reserved. *
\n * *
\n **********************************************************<\/p>\n

Rom Monitor Program Version 12.2(20r)EW1
\n Supervisor: WS-X4013+TS Chassis: WS-C4503
\n Hardware Revisions – Board: 7.4 CPLD: 4 Dagobah: 226<\/p>\n

MAC Address : 00-1a-2f-fc-0c-51
\n IP Address : 10.1.8.105
\n Netmask : 255.255.0.0
\n Gateway : 10.1.1.1
\n TftpServer : 10.1.1.1
\n Main Memory : 256 MBytes<\/p>\n

***** The system will autoboot in 5 seconds *****<\/p>\n

Type control-C to prevent autobooting.
\n\/\/\u6309Ctrl+C\u952e
\n Autoboot cancelled……… please wait!!!<\/p>\n

Autoboot cancelled……… please wait!!!
\nrommon 1 >
\nrommon 1 >
\nrommon 1 > [interrupt]<\/p>\n

rommon 1 > [interrupt]
\n\/\/\u4f7f\u7528\u547d\u4ee4set
\nrommon 1 >set
\n PS1=rommon ! >
\n TftpServer=10.1.1.1
\n Gateway=10.1.1.1
\n IpAddr=10.1.8.105
\n Netmask=255.255.0.0
\n Broadcast=10.1.1.255
\n RommonVer=12.2(20r)EW1
\n DiagMonitorAction=Normal
\n BOOT=
\n BootedFileName=bootflash:
\n CV=bootflash:
\n ConfigReg=0x2101\t\/\/\u5f97\u5230ConfigReg\u7684\u503c
\n ConsecPostPassedCnt=99
\n\/\/\u4f7f\u7528\u547d\u4ee4confreg
\nrommon 2 >confreg<\/p>\n

Configuration Summary :
\n => load rom after netboot fails
\n => console baud: 9600
\n => autoboot from: the first file from internal flash device<\/p>\n

do you wish to change the configuration? y\/n [n]: y\t\/\/\u4f7f\u7528yes
\n enable “diagnostic mode”? y\/n [n]: n
\n enable “use net in IP bcast address”? y\/n [n]: n
\n disable “load rom after netboot fails”? y\/n [n]: n
\n enable “use all zero broadcast”? y\/n [n]: n
\n enable “break\/abort has effect”? y\/n [n]:
\n enable “ignore system config info”? y\/n [n]: y\t\/\/\u4f7f\u7528yes<\/p>\n

change console baud rate? y\/n [n]: n<\/p>\n

change the boot characteristics? y\/n [n]: n<\/p>\n

Configuration Summary :
\n => load rom after netboot fails
\n => ignore system config info
\n => console baud: 9600
\n => autoboot from: the first file from internal flash device<\/p>\n

do you wish to save this configuration? y\/n [n]: y\t\/\/\u4f7f\u7528yes
\n You must reset or power cycle for new configuration to take effect<\/p>\n

\/\/\u4f7f\u7528reset\u547d\u4ee4
\nrommon 3 >reset<\/p>\n

Resetting …….<\/p>\n

rommon 4 ><\/p>\n

**********************************************************
\n * *
\n * Welcome to Rom Monitor for WS-X4013+TS System. *
\n * Copyright (c) 1999-2004 by Cisco Systems, Inc. *
\n * All rights reserved. *
\n * *
\n **********************************************************<\/p>\n

Rom Monitor Program Version 12.2(20r)EW1
\n Supervisor: WS-X4013+TS Chassis: WS-C4503
\n Hardware Revisions – Board: 7.4 CPLD: 4 Dagobah: 226<\/p>\n

MAC Address : 00-1a-2f-fc-0c-51
\n IP Address : 10.1.8.105
\n Netmask : 255.255.0.0
\n Gateway : 10.1.1.1
\n TftpServer : 10.1.1.1
\n Main Memory : 256 MBytes<\/p>\n

***** The system will autoboot in 5 seconds *****<\/p>\n

Type control-C to prevent autobooting.
\n . . . . .<\/p>\n

******** The system will autoboot now ********<\/p>\n

\/\/\u6ce8\u610f\uff0c\u6b64\u5904config-register = 0x2141
\n config-register = 0x2141<\/p>\n

Autobooting using the first file from bootflash…..<\/p>\n

Rommon reg: 0xE2004180
\n##########
\nk2diags version 4.2.2_h<\/p>\n

prod: WS-X4013+TS part: 73-9337-10 serial: JAE110653K7<\/p>\n

Power-on-self-test for Module 1: WS-X4013+TS
\n Port\/Test Status: (. = Pass, F = Fail, U = Untested)
\n Reset Reason: PowerUp Software\/User<\/p>\n

Port Traffic: L2 Serdes Loopback …
\n 0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
\n12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
\n24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: .<\/p>\n

Port Traffic: L2 Asic Loopback …
\n 0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
\n12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
\n24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: .<\/p>\n

Port Traffic: L3 Asic Loopback …
\n 0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
\n12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
\n24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: .<\/p>\n

Switch Subsystem Memory …
\n 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: . 12: .
\n13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: . 24: .
\n25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: . 36: .
\n37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: . 48: .
\n49: . 50: . 51: . 52: . 53: . 54: . 55: .<\/p>\n

Front Panel 10\/100\/1000 Ports …
\n 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: . 12: .<\/p>\n

Front Panel SFP Ports …
\n13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: .<\/p>\n

Module 1 Passed<\/p>\n

Exiting to ios…<\/p>\n

Rommon reg: 0xE2000180
\n###################################
\n Restricted Rights Legend<\/p>\n

Use, duplication, or disclosure by the Government is
\nsubject to restrictions as set forth in subparagraph
\n(c) of the Commercial Computer Software – Restricted
\nRights clause at FAR sec. 52.227-19 and subparagraph
\n(c) (1) (ii) of the Rights in Technical Data and Computer
\nSoftware clause at DFARS sec. 252.227-7013.<\/p>\n

cisco Systems, Inc.
\n 170 West Tasman Drive
\n San Jose, California 95134-1706<\/p>\n

Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12 <\/p>\n

.2(25)EWA6, RELEASE SOFTWARE (fc1)
\nTechnical Support: http:\/\/www.cisco.com\/techsupport
\nCopyright (c) 1986-2006 by Cisco Systems, Inc.
\nCompiled Fri 02-Jun-06 15:20 by ssearch
\nImage text-base: 0x10000000, data-base: 0x114ED458<\/p>\n

Testing packet buffer memory:065536..done
\nAll packet buffers passed.
\ncisco WS-C4503 (MPC8245) processor (revision 4) with 262144K bytes of memory.
\nProcessor board ID FOX1044071Y
\nMPC8245 CPU at 267Mhz, Supervisor II+TS
\nLast reset from PowerUp
\n1 Virtual Ethernet interface
\n20 Gigabit Ethernet interfaces
\n511K bytes of non-volatile configuration memory.<\/p>\n

Press RETURN to get started!<\/p>\n

\/\/\u91cd\u542f\u5b8c\u6210
\n00:00:25: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
\n00:00:26: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuration is ignored <\/p>\n

based on the configuration register setting.
\n00:00:26: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 1 (WS-X4013+TS S\/N: JAE11065 <\/p>\n

3K7 Hw: 1.6) is online
\n00:00:26: %SYS-5-RESTART: System restarted —
\nCisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12 <\/p>\n

.2(25)EWA6, RELEASE SOFTWARE (fc1)
\nTechnical Support: http:\/\/www.cisco.com\/techsupport
\nCopyright (c) 1986-2006 by Cisco Systems, Inc.
\nCompiled Fri 02-Jun-06 15:20 by ssearch<\/p>\n

\/\/\u73b0\u5728\u5df2\u7ecf\u6ca1\u6709\u5bc6\u7801\uff0c\u662f\u7a7a\u8bbe\u7f6e
\nSwitch>
\nSwitch>en
\nSwitch#sh ver\t\/\/\u663e\u793a\u5f53\u524d\u7248\u672c
\nCisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12 <\/p>\n

.2(25)EWA6, RELEASE SOFTWARE (fc1)
\nTechnical Support: http:\/\/www.cisco.com\/techsupport
\nCopyright (c) 1986-2006 by Cisco Systems, Inc.
\nCompiled Fri 02-Jun-06 15:20 by ssearch
\nImage text-base: 0x10000000, data-base: 0x114ED458<\/p>\n

ROM: 12.2(20r)EW1
\nDagobah Revision 226, Swamp Revision 4<\/p>\n

Switch uptime is 0 minutes
\nSystem returned to ROM by power-on
\nSystem image file is “bootflash:”<\/p>\n

cisco WS-C4503 (MPC8245) processor (revision 4) with 262144K bytes of memory.
\nProcessor board ID FOX1044071Y
\nMPC8245 CPU at 267Mhz, Supervisor II+TS
\nLast reset from PowerUp
\n1 Virtual Ethernet interface
\n20 Gigabit Ethernet interfaces
\n511K bytes of non-volatile configuration memory.<\/p>\n

Configuration register is 0x2141\t\/\/\u6ce8\u610f\u5f53\u524d\u7684\u503c<\/p>\n

Switch#configure memory\t\t\/\/\u914d\u7f6e\u539f\u4ea4\u6362\u673a\u7684\u8bbe\u7f6e<\/p>\n

Uncompressed configuration from 2881 bytes to 6200 bytes
\n000005: *Mar 25 01:08:12: %SYS-6-CLOCKUPDATE: System clock has been updated from <\/p>\n

01:08:12 UTC Sun Mar 25 2012 to 09:08:12 WST Sun Mar 25 2012, configured from c <\/p>\n

onsole by console.
\nWaiWang4503#
\n000006: *Mar 25 01:08:17: %SYS-5-CONFIG_I: Configured from memory by console
\nWaiWang4503#sh run\t\/\/\u663e\u793a\u539f\u4ea4\u6362\u673a\u7684\u8bbe\u7f6e
\nBuilding configuration…<\/p>\n

Current configuration : 6220 bytes
\n!
\nversion 12.2
\nno service pad
\nservice timestamps debug uptime
\nservice timestamps log datetime
\nno service password-encryption
\nservice compress-config
\nservice sequence-numbers
\n!
\nhostname WaiWang4503
\n!
\nboot-start-marker
\nboot-end-marker
\n!
\nenable secret 5 $1$fpcU$AHgNUGU1WxmdvhlKI1O.0.
\n!
\nusername hyjk privilege 15 secret 5 $1$GbaL$aUf9ZUSpowztBH5btnoqP0
\naaa new-model
\naaa authentication login default local
\n!
\naaa session-id common
\nclock timezone WST 8
\nqos dbl
\nqos map dscp 24 25 26 27 28 29 30 31 to tx-queue 4
\nqos map dscp 32 33 34 35 36 37 38 39 to tx-queue 4
\nqos map cos 3 to dscp 26
\nqos map cos 5 to dscp 46
\nqos
\nip subnet-zero
\nno ip domain-lookup
\nip dhcp excluded-address 192.168.1.1 192.168.1.20
\nip dhcp excluded-address 192.168.1.250 192.168.1.254
\n!
\nip dhcp pool vlan1
\n network 192.168.1.0 255.255.255.0
\n default-router 192.168.1.254
\n dns-server 192.168.1.10 202.99.160.68
\n!
\nip dhcp pool vlan2
\n network 192.168.2.0 255.255.255.0
\n default-router 192.168.2.254
\n dns-server 192.168.1.10 202.99.160.68
\n!
\nip dhcp pool vlan3
\n network 192.168.0.0 255.255.255.0
\n default-router 192.168.0.254
\n dns-server 192.168.1.10 202.99.160.68
\n!
\nip dhcp snooping vlan 1
\nip dhcp snooping
\n!
\nno file verify auto
\n!
\nspanning-tree mode pvst
\nspanning-tree extend system-id
\nspanning-tree uplinkfast
\nspanning-tree backbonefast
\nspanning-tree vlan 1-2 priority 24576
\npower redundancy-mode redundant
\n!
\n!
\n!
\nvlan internal allocation policy ascending
\n!
\npolicy-map autoqos-voip-policy
\n class class-default
\n dbl
\n!
\n!
\ninterface GigabitEthernet1\/1
\n description bgl1
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/2
\n description bgl2
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/3
\n description bgl3
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/4
\n description bgl4
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/5
\n description bgl5
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/6
\n description ffwai
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/7
\n description dcwai
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/8
\n description FW-Router
\n switchport mode access
\n spanning-tree portfast
\n!
\ninterface GigabitEthernet1\/9
\n switchport mode access
\n switchport port-security
\n switchport port-security aging time 2
\n switchport port-security violation restrict
\n switchport port-security aging type inactivity
\n switchport port-security mac-address sticky
\n switchport port-security mac-address sticky 001a.6449.bf9f
\n macro description cisco-desktop
\n spanning-tree portfast
\n spanning-tree bpduguard enable
\n!
\ninterface GigabitEthernet1\/10
\n switchport mode access
\n switchport port-security
\n switchport port-security aging time 2
\n switchport port-security violation restrict
\n switchport port-security aging type inactivity
\n macro description cisco-desktop
\n spanning-tree portfast
\n spanning-tree bpduguard enable
\n!
\ninterface GigabitEthernet1\/11
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/12
\n switchport access vlan 2
\n switchport mode access
\n switchport port-security
\n switchport port-security aging time 2
\n switchport port-security violation restrict
\n switchport port-security aging type inactivity
\n macro description cisco-desktop
\n spanning-tree portfast
\n spanning-tree bpduguard enable
\n!
\ninterface GigabitEthernet1\/13
\n!
\ninterface GigabitEthernet1\/14
\n!
\ninterface GigabitEthernet1\/15
\n!
\ninterface GigabitEthernet1\/16
\n!
\ninterface GigabitEthernet1\/17
\n!
\ninterface GigabitEthernet1\/18
\n!
\ninterface GigabitEthernet1\/19
\n!
\ninterface GigabitEthernet1\/20
\n!
\ninterface Vlan1
\n ip address 192.168.1.8 255.255.255.0
\n!
\ninterface Vlan2
\n ip address 192.168.2.254 255.255.255.0
\n shutdown
\n!
\ninterface Vlan3
\n ip address 192.168.0.254 255.255.255.0
\n shutdown
\n!
\nip route 0.0.0.0 0.0.0.0 192.168.1.254
\nip http server
\nip http authentication local
\n!
\n!
\n!
\nsnmp-server community yingxinbl RO
\n!
\nradius-server source-ports 1645-1646
\n!
\nline con 0
\n password hyjknet
\n stopbits 1
\nline vty 0 4
\n password hyjknet
\n length 0
\n!
\n!
\nend<\/p>\n

WaiWang4503#config t\t\t\/\/\u8fdb\u5165\u5168\u5c40\u914d\u7f6e\u6a21\u5f0f
\nEnter configuration commands, one per line. End with CNTL\/Z.<\/p>\n

WaiWang4503(config)#enable secret cisco\t\t\/\/\u4fee\u6539\u7279\u6743\u7684\u5bc6\u7801\uff0c
\nWaiWang4503(config)#config-register 0x2101\t\/\/\u4fee\u6539\u542f\u52a8\u53c2\u6570\u7684\u503c
\nWaiWang4503(config)#^Z
\nWaiWang4503#write memory\t\t\t\/\/\u5c06\u4fee\u6539\u4fdd\u5b58\u5230\u542f\u52a8\u8bbe\u7f6e
\nBuilding configuration…
\nCompressed configuration from 6220 bytes to 2900 bytes[OK]<\/p>\n

WaiWang4503#
\nWaiWang4503#reload\t\t\/\/\u91cd\u542f\u4ea4\u6362\u673a
\nProceed with reload? [confirm]<\/p>\n

000008: *Mar 25 01:12:45: %SYS-5-RELOAD: Reload requested by console. Reload Rea <\/p>\n

son: Reload Command.<\/p>\n

**********************************************************
\n * *
\n * Welcome to Rom Monitor for WS-X4013+TS System. *
\n * Copyright (c) 1999-2004 by Cisco Systems, Inc. *
\n * All rights reserved. *
\n * *
\n **********************************************************<\/p>\n

Rom Monitor Program Version 12.2(20r)EW1
\n Supervisor: WS-X4013+TS Chassis: WS-C4503
\n Hardware Revisions – Board: 7.4 CPLD: 4 Dagobah: 226<\/p>\n

MAC Address : 00-1a-2f-fc-0c-51
\n IP Address : 10.1.8.105
\n Netmask : 255.255.0.0
\n Gateway : 10.1.1.1
\n TftpServer : 10.1.1.1
\n Main Memory : 256 MBytes<\/p>\n

***** The system will autoboot in 5 seconds *****<\/p>\n

Type control-C to prevent autobooting.
\n . . . . .<\/p>\n

******** The system will autoboot now ********<\/p>\n

config-register = 0x2101<\/p>\n

Autobooting using the first file from bootflash…..<\/p>\n

Rommon reg: 0xE2004180
\n##########
\nk2diags version 4.2.2_h<\/p>\n

prod: WS-X4013+TS part: 73-9337-10 serial: JAE110653K7<\/p>\n

Power-on-self-test for Module 1: WS-X4013+TS
\n Port\/Test Status: (. = Pass, F = Fail, U = Untested)
\n Reset Reason: Software\/User<\/p>\n

Port Traffic: L2 Serdes Loopback …
\n 0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
\n12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
\n24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: .<\/p>\n

Port Traffic: L2 Asic Loopback …
\n 0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
\n12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
\n24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: .<\/p>\n

Port Traffic: L3 Asic Loopback …
\n 0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
\n12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
\n24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: .<\/p>\n

Switch Subsystem Memory …
\n 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: . 12: .
\n13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: . 24: .
\n25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: . 36: .
\n37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: . 48: .
\n49: . 50: . 51: . 52: . 53: . 54: . 55: .<\/p>\n

Front Panel 10\/100\/1000 Ports …
\n 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: . 12: .<\/p>\n

Front Panel SFP Ports …
\n13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: .<\/p>\n

Module 1 Passed<\/p>\n

Exiting to ios…<\/p>\n

Rommon reg: 0xE2000180
\n###################################
\n Restricted Rights Legend<\/p>\n

Use, duplication, or disclosure by the Government is
\nsubject to restrictions as set forth in subparagraph
\n(c) of the Commercial Computer Software – Restricted
\nRights clause at FAR sec. 52.227-19 and subparagraph
\n(c) (1) (ii) of the Rights in Technical Data and Computer
\nSoftware clause at DFARS sec. 252.227-7013.<\/p>\n

cisco Systems, Inc.
\n 170 West Tasman Drive
\n San Jose, California 95134-1706<\/p>\n

Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12 <\/p>\n

.2(25)EWA6, RELEASE SOFTWARE (fc1)
\nTechnical Support: http:\/\/www.cisco.com\/techsupport
\nCopyright (c) 1986-2006 by Cisco Systems, Inc.
\nCompiled Fri 02-Jun-06 15:20 by ssearch
\nImage text-base: 0x10000000, data-base: 0x114ED458<\/p>\n

Testing packet buffer memory:065536..done
\nAll packet buffers passed.
\ncisco WS-C4503 (MPC8245) processor (revision 4) with 262144K bytes of memory.
\nProcessor board ID FOX1044071Y
\nMPC8245 CPU at 267Mhz, Supervisor II+TS
\nLast reset from Reload
\n1 Virtual Ethernet interface
\n20 Gigabit Ethernet interfaces
\n511K bytes of non-volatile configuration memory.<\/p>\n

Uncompressed configuration from 2900 bytes to 6220 bytes<\/p>\n

Press RETURN to get started.<\/p>\n

User Access Verification<\/p>\n

Username: hyjk
\nPassword:\t\t\/\/\u4e0d\u77e5\u9053\u8fd9\u4e2a\u5bc6\u7801\u4e5f\u53ef\u4ee5\u5728\u4fee\u6539\u7279\u6743\u5bc6\u7801\u65f6\u4e00\u5e76\u4fee\u6539\u3002<\/p>\n

WaiWang4503>en
\nPassword:\t\t\/\/\u6b64\u5904\u5df2\u7ecf\u4e3a\u4fee\u6539\u540e\u7684\u5bc6\u7801
\nWaiWang4503#sh run
\nBuilding configuration…<\/p>\n

Current configuration : 6220 bytes
\n!
\nversion 12.2
\nno service pad
\nservice timestamps debug uptime
\nservice timestamps log datetime
\nno service password-encryption
\nservice compress-config
\nservice sequence-numbers
\n!
\nhostname WaiWang4503
\n!
\nboot-start-marker
\nboot-end-marker
\n!
\nenable secret 5 $1$FwKY$muXKdDiyLGeNQNP9vFy.61
\n!
\nusername hyjk privilege 15 secret 5 $1$GbaL$aUf9ZUSpowztBH5btnoqP0
\naaa new-model
\naaa authentication login default local
\n!
\naaa session-id common
\nclock timezone WST 8
\nqos dbl
\nqos map dscp 24 25 26 27 28 29 30 31 to tx-queue 4
\nqos map dscp 32 33 34 35 36 37 38 39 to tx-queue 4
\nqos map cos 3 to dscp 26
\nqos map cos 5 to dscp 46
\nqos
\nip subnet-zero
\nno ip domain-lookup
\nip dhcp excluded-address 192.168.1.1 192.168.1.20
\nip dhcp excluded-address 192.168.1.250 192.168.1.254
\n!
\nip dhcp pool vlan1
\n network 192.168.1.0 255.255.255.0
\n default-router 192.168.1.254
\n dns-server 192.168.1.10 202.99.160.68
\n!
\nip dhcp pool vlan2
\n network 192.168.2.0 255.255.255.0
\n default-router 192.168.2.254
\n dns-server 192.168.1.10 202.99.160.68
\n!
\nip dhcp pool vlan3
\n network 192.168.0.0 255.255.255.0
\n default-router 192.168.0.254
\n dns-server 192.168.1.10 202.99.160.68
\n!
\nip dhcp snooping vlan 1
\nip dhcp snooping
\n!
\nno file verify auto
\n!
\nspanning-tree mode pvst
\nspanning-tree extend system-id
\nspanning-tree uplinkfast
\nspanning-tree backbonefast
\nspanning-tree vlan 1-2 priority 24576
\npower redundancy-mode redundant
\n!
\n!
\n!
\nvlan internal allocation policy ascending
\n!
\npolicy-map autoqos-voip-policy
\n class class-default
\n dbl
\n!
\n!
\ninterface GigabitEthernet1\/1
\n description bgl1
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/2
\n description bgl2
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/3
\n description bgl3
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/4
\n description bgl4
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/5
\n description bgl5
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/6
\n description ffwai
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/7
\n description dcwai
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/8
\n description FW-Router
\n switchport mode access
\n spanning-tree portfast
\n!
\ninterface GigabitEthernet1\/9
\n switchport mode access
\n switchport port-security
\n switchport port-security aging time 2
\n switchport port-security violation restrict
\n switchport port-security aging type inactivity
\n switchport port-security mac-address sticky
\n switchport port-security mac-address sticky 001a.6449.bf9f
\n macro description cisco-desktop
\n spanning-tree portfast
\n spanning-tree bpduguard enable
\n!
\ninterface GigabitEthernet1\/10
\n switchport mode access
\n switchport port-security
\n switchport port-security aging time 2
\n switchport port-security violation restrict
\n switchport port-security aging type inactivity
\n macro description cisco-desktop
\n spanning-tree portfast
\n spanning-tree bpduguard enable
\n!
\ninterface GigabitEthernet1\/11
\n switchport trunk encapsulation dot1q
\n switchport mode trunk
\n switchport nonegotiate
\n service-policy output autoqos-voip-policy
\n qos trust cos
\n auto qos voip trust
\n tx-queue 3
\n bandwidth percent 33
\n priority high
\n shape percent 33
\n macro description cisco-switch
\n spanning-tree link-type point-to-point
\n!
\ninterface GigabitEthernet1\/12
\n switchport access vlan 2
\n switchport mode access
\n switchport port-security
\n switchport port-security aging time 2
\n switchport port-security violation restrict
\n switchport port-security aging type inactivity
\n macro description cisco-desktop
\n spanning-tree portfast
\n spanning-tree bpduguard enable
\n!
\ninterface GigabitEthernet1\/13
\n!
\ninterface GigabitEthernet1\/14
\n!
\ninterface GigabitEthernet1\/15
\n!
\ninterface GigabitEthernet1\/16
\n!
\ninterface GigabitEthernet1\/17
\n!
\ninterface GigabitEthernet1\/18
\n!
\ninterface GigabitEthernet1\/19
\n!
\ninterface GigabitEthernet1\/20
\n!
\ninterface Vlan1
\n ip address 192.168.1.8 255.255.255.0
\n!
\ninterface Vlan2
\n ip address 192.168.2.254 255.255.255.0
\n shutdown
\n!
\ninterface Vlan3
\n ip address 192.168.0.254 255.255.255.0
\n shutdown
\n!
\nip route 0.0.0.0 0.0.0.0 192.168.1.254
\nip http server
\nip http authentication local
\n!
\n!
\n!
\nsnmp-server community yingxinbl RO
\n!
\nradius-server source-ports 1645-1646
\n!
\nline con 0
\n password hyjknet
\n stopbits 1
\nline vty 0 4
\n password hyjknet
\n length 0
\n!
\n!
\nend<\/p>\n

WaiWang4503#
\n\/\/\u81f3\u6b64\uff0c4503\u4ea4\u6362\u673a\u5df2\u7ecf\u5728\u6ca1\u6709\u4fee\u6539\u914d\u7f6e\u7684\u60c5\u51b5\u4e0b\u91cd\u7f6e\u4e86\u5bc6\u7801
\n[\/cc]<\/p>\n","protected":false},"excerpt":{"rendered":"

\u516c\u53f8\u76844503\u4ea4\u6362\u673a\u4fee\u597d\u540e\u53ef\u4ee5\u6b63\u5e38\u542f\u52a8\uff0c\u4f46\u6ca1\u6709\u5bc6\u7801\u3002\u67e5\u9605cisco\u7684\u5b98\u65b9\u6587\u6863\u540e\u5bf9 … \u7ee7\u7eed\u9605\u8bfb →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3],"tags":[],"class_list":["post-293","post","type-post","status-publish","format-standard","hentry","category-net"],"_links":{"self":[{"href":"http:\/\/www.luwl.net\/index.php?rest_route=\/wp\/v2\/posts\/293","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.luwl.net\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.luwl.net\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.luwl.net\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.luwl.net\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=293"}],"version-history":[{"count":0,"href":"http:\/\/www.luwl.net\/index.php?rest_route=\/wp\/v2\/posts\/293\/revisions"}],"wp:attachment":[{"href":"http:\/\/www.luwl.net\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=293"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.luwl.net\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=293"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.luwl.net\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=293"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}